Ncam Reality
...
Setting Up
Camera Bar Calibration
Accelerometer
2min
This is indicated by the ground plane, when tracking is initialized, not being flat with the floor (assuming the floor is level)
The image below shows an extreme example where the floor plane is clearly tilted heavily to the left
Ground Plane misaligned

Camera must not be moving
If the camera bar was moving when the tracking was started then the ground plane will be misaligned, this is expected. Before making a judgement on the quality of the accelerometer, press F9 when the camera is stationary to ensure a true reading is taken
Please contact [email protected] for instructions on calibrating the accelerometer should it become necessary